An 6 inch silver Protect-A-Sleeve, sold by each.
Protect-A-Boot Ringless Sleeves are superior protection for extreme angled plug wire boots that solve the problem of burning and cracking plug boots and wires from header and engine heat. DEI Protect-A-Boot Ringless Sleeves are uniquely designed to protect spark plug boots & wires against the harmful effects of direct and continuous heat - up to 1200F. Continued exposure to extreme heat generated from the engine block, exhaust manifold and headers can cause burn through, hardening or cracking of the spark plug wires and boots. Like the original Protect-A-Boots product, the ringless sleeves offer the same heat protection and double wall construction for added strength and durability, yet are designed to provide a universal fit for extreme angled, oversized, or rigid boots like ceramic ignition wire ends. The 1.25 in. I.D. at both ends and pliable construction allow the sleeves to fit multiple angled spark plug boots. Otherwise the material is the same as DEI's popular Protect-A-Boots that are made from a tightly woven high temperature resistant glass fiber material. Universal - fits multiple angled spark plug boots 1.25 in. I.D. x 6 in. length Withstands up to 1200F of direct heat Glass fiber double-wall construction
Protect-A-Boot Ringless Sleeves are superior protection for extreme angled plug wire boots that solve the problem of burning and cracking plug boots and wires from header and engine heat. DEI Protect-A-Boot Ringless Sleeves are uniquely designed to protect spark plug boots & wires against the harmful effects of direct and continuous heat - up to 1200F. Continued exposure to extreme heat generated from the engine block, exhaust manifold and headers can cause burn through, hardening or cracking of the spark plug wires and boots. Like the original Protect-A-Boots product, the ringless sleeves offer the same heat protection and double wall construction for added strength and durability, yet are designed to provide a universal fit for extreme angled, oversized, or rigid boots like ceramic ignition wire ends. The 1.25 in. I.D. at both ends and pliable construction allow the sleeves to fit multiple angled spark plug boots. Otherwise the material is the same as DEI's popular Protect-A-Boots that are made from a tightly woven high temperature resistant glass fiber material. Universal - fits multiple angled spark plug boots 1.25 in. I.D. x 6 in. length Withstands up to 1200F of direct heat Glass fiber double-wall construction
- Withstands 1200Degrees F Direct Continuous Heat
- Helps Prevent Burn-Trough/Hardening/Cracking Of Boots
- Universal-Fits Most Straight Or Angled Boots
- Installs In Seconds
- Double-Wall Construction For Added Durability
- Non Flammable/Protects Against Chemicals/Resists Water
Information:
Protect-A-Boot Ringless Sleeves are superior protection for extreme angled plug wire boots that solve the problem of burning and cracking plug boots and wires from header and engine heat. DEI Protect-A-Boot Ringless Sleeves are uniquely designed to protect spark plug boots & wires against the harmful effects of direct and continuous heat - up to 1200F. Continued exposure to extreme heat generated from the engine block, exhaust manifold and headers can cause burn through, hardening or cracking of the spark plug wires and boots. Like the original Protect-A-Boots product, the ringless sleeves offer the same heat protection and double wall construction for added strength and durability, yet are designed to provide a universal fit for extreme angled, oversized, or rigid boots like ceramic ignition wire ends. The 1.25 in. I.D. at both ends and pliable construction allow the sleeves to fit multiple angled spark plug boots. Otherwise the material is the same as DEI's popular Protect-A-Boots that are made from a tightly woven high temperature resistant glass fiber material. Universal - fits multiple angled spark plug boots 1.25 in. I.D. x 6 in. length Withstands up to 1200F of direct heat Glass fiber double-wall construction| Attributes | |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Silver |
| Country of Origin (Primary) | US |
| Direct Heat Resistance | 1200°F |
| GTIN | 00607078915511 |
| Harmonized Tariff Code (Schedule B) | 7019801020 |
| Hazardous Material Code | N |
| ID Imperial | 1 1/4 inch |
| Includes | An 6 inch silver Protect-A-Sleeve, sold by each. |
| Inside Diameter | 1.25 |
| Length | 6 inch, 6 |
| Life Cycle Status Code | Available to Order |
| Material | Glass Fiber, Glass Fiber |
| NAFTA Preference Criterion Code | B |
| Pack | Bulk |
| Ring | Ringless |
| SDR Required Flag | N |
| Warranty Time | 1 |
Design Engineering, Inc. 91551 Protect-A-Boot 1.25in ID Silver Bulk
Product Information
- Brand: Design Engineering, Inc.
- Product Number: 91551